greggdrilling.com

 
   
 
 
 
 
 

                   

 

SPT ENERGY CALIBRATION SERVICES

Gregg uses a Pile Driving Analyzer® (PDA) system to conduct SPT energy calibration.  An instrumented section of NWJ or AWJ rod measures strain and acceleration with each hammer blow.  The PDA can then calculate the amount of energy transferred to the rod by the force-velocity approach.  Different rigs, hammers, operators, and site conditions can cause wide variations in energy transfer.  Therefore, it is important to conduct SPT energy measurements on each project.  From the data obtained, it is possible to adjust the observed N value to a normalized N60 for standard 60% energy transfer into the rods.  All equipment and analysis conform to ASTM  D6066.

 
SPT Energy Calibration
 

 

SERVICES AT A GLANCE

  • SPT Energy Calibration/Efficiency

  • Pile Bearing Capacity

  • Dynamic Pile Stresses
    - Limit potential damage
    - Evaluate bending stresses

  • Pile Integrity

  • Soil Resistance to Driving

  • Hammer Efficiency/Performance
    - Energy transferred to pile
    - Hammer speed

  • GRLWEAP Software Analysis

  • PDIPILOT Software Analysis

  • CAPWAP Software Analysis

 Conforms to International Standards and ASTM D4945

 
 
 

DYNAMIC PILE TESTING SERVICES

Gregg performs dynamic pile monitoring using the pile driving analyzer’s computer based data acquisition system.  The software is based on the theory of stress wave propagation in piles, also known as the Case Method of pile testing.  Accelerometers and strain gauges on the pile acquire wave data after the impact of a hammer or drop weight.  The data is interpreted by the PDA and reduced by Gregg’s trained professionals to aid in the design of pile-supported structures.

 

EQUIPMENT

 Pile Driving Analyzer® Model PAK

  • Collects and analyzes 8 channels of data

  • Operator can choose from over 150 dynamic results to display with each impact

  • Pentium processor
    - Allows large amount of data to be collected and processed in short time

  • Windows environment

  • Able to monitor pile installation with vibratory hammer

  • Rugged, lightweight, and portable design

  • Water resistant membrane keyboard

  • High visibility color LCD screen

Pile Drive Analyzer ® Model Pak

 

Proposal/Job Center

CLIENT LOGIN

CPT Data Center

Data Plotting Login

Join Our Mail List

Register for
  
email updates

New Programs

 

 

>>  Learn more

New CPT Software


>> CPTU SOFTWARE
>> CLIQ SOFTWARE
 

Newsletter

>> CURRENT ISSUE

>> BACK ISSUES

 


Home | About Us | Services | Equipment  | Locations | Contact Us | Education | Resources  | What's New | The Rock Shop | Site Map
Client Login

Gregg Drilling & Testing, Inc.۰ 2726 Walnut Avenue; Signal Hill, California  90755 ۰ (562) 427-6899 Phone and (562) 427-3314 Fax
Additional Locations:  Houston ۰ Palo Alto ۰ San Francisco

 E-Mail: info@greggdrilling.com

© Gregg Drilling & Testing, Inc. 2002/03.  All rights reserved.